R
Technical Parameters of Electric Threading Machine
Name
Name:
Electric Pipe Cutting and Threading Machine
Model: R
Specifications:
Die specifications:,,
Voltage:
Power:
Speed: )
Gross weight and net weight:
Packing size:
R
Introduction to the functions of the electric threading machine
When the R electric threading machine is working, first put the pipe to be threaded into the pipe chuck, impact it and clamp it tightly, press the start switch, and the pipe will rotate with the chuck. Get up, adjust the size of the die opening on the die head, and set the length of the thread opening. Then turn the feed handwheel clockwise to make the die knife on the die head stick to the end of the rotating pipe with constant force. The wire cover is automatically cut, and the cooling system automatically sprays oil to cool the die knife. When the wire mouth is processed to the preset length, the die knife will automatically open and the wire mouth processing is completed. Turn off the power and open the chuck. Remove the tube.
The threading machine also has the function of cutting off the pipe: put the pipe into the pipe chuck, impact and clamp, start the switch, put down the cutting knife holder on the feed device, pull the feed handwheel, so that the cutting knife holder Move the blade to the length point you want to cut, and slowly rotate the handle on the cutter so that the blade squeezes the rotating pipe. The pipe rotates in circles and is squeezed and cut by the blade.
4-inch threading machine manufacturer 4-inch electric threading machine manufacturer produces threading machine